How long does it take to fill spare air with hand pump?
To fill a 6.0 cu. ft. cylinder: approximately 900 pumps, 1.5 – 2 hours with breaks (important to let the pump cool down every 50 pumps or so).
How long will a spare air tank last?
A: It can last around 6-10 minutes depending on how fast you breath.
When should your air tank be replaced or refilled?
Industry guidelines recommend replacing air in cylinders annually. Spare Air can be filled using the SCUBA tank refill adapter attached to a filled 3000 psi SCUBA tank.
Can you refill spare air?
One of the best features of Spare Air is that you can simply and easily refill it yourself – allowing you to be in control of your own safety! Spare Air is easily refilled from your own SCUBA tank in about 1 minute. Simply attach the adapter that is included in every Spare Air package to your own SCUBA tank.
What is nitrox gas?
In the broadest sense, Nitrox is any gas blend of oxygen and nitrogen. Air, of course, is basically a nitrox mix of approximately 21 percent oxygen and 79 percent nitrogen. For divers, enriched air Nitrox is any gas blend with more than 21 percent oxygen.
Can you dive without a padi?
Re: Scuba diving without PADI certification? Yep all of them. You can do a discover scuba diving course which will give you the basic training on how everything works then you will go out on a couple of dives with a Dive Master.
How much pressure is in a SCBA tank?
An SCBA typically has three main components: a high-pressure tank (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and an inhalation connection (mouthpiece, mouth mask or face mask), connected together and mounted to a carrying frame.
How do you fill a 910s tank with spare air?
Thread the 910S Tank Refill Adapter onto the check valve port of your Spare Air. SCUBA tank must be full in order to completely fill Spare Air. Place the refill adapter onto a filled SCUBA Tank. Slowly open the tank valve to allow the pressure to equalize, filling your Spare Air.
What is an air refill adapter used for?
This adapter allows Spare-Air to be refilled from an air compressor. Use this Spare-Air refill adapter on any boat or dive store compressor that is capable of filling scuba tanks. Adapter has cylinder valve head that will easily attach it to a yoke whip at the shop or on the boat.
How do I fill up my spare air with scuba?
Spare Air can be filled using the SCUBA tank refill adapter attached to a filled 3000 psi SCUBA tank. Thread the 910S Tank Refill Adapter onto the check valve port of your Spare Air. SCUBA tank must be full in order to completely fill Spare Air. Place the refill adapter onto a filled SCUBA Tank.
How do I refill the spare air in my 930c?
Comes with a DryPac filter and custom refill adapter to fill Spare Air out of the box. Our Hand Pump includes 930C Custom Refill Adapter. Simply thread adapter onto the product refill port and then quick connect to the Hand Pump and begin pumping. Click here for more information and pump estimates.