How much HP does ProCharger add?

ProCharger Centrifugal Supercharger adds 300 HP to a Stock LS3 Crate Engine!

How much horsepower does a supercharged 383 stroker make?

After installation of the ProCharger P-1X and blow-through carb, the supercharged 383 pumped out 641 hp at 6,500 rpm and 566 lb-ft of torque at 4,900 rpm. Stepping up the boost to 10.6 psi resulted in peak numbers of 679 hp and 599 lb-ft of torque.

Can you supercharge a 383 stroker engine?

Add a Supercharger to a Well-built 383 and Get a Real Boost in Performance. Today it’s not uncommon to see superchargers finding their way onto just about anything short of a lawnmower. Blower companies offer bolt-on kits for virtually every application, be it an EFI-induced late-model or a carburetor-fed classic.

What’s the smallest ProCharger?

Procharger says the A-1 is the world’s smallest centrifugal, self-contained, gear-driven blower. Normally we would not be bragging about having a small blower, but this thing is greatness, making 8 psi and doubling the horsepower of a Polaris UTV, from around 40 rwhp to around 80!

Do you need intercooler with ProCharger?

In truth, neither turbocharging nor supercharging require an “intercooler,” which is properly named a “charge air cooler.” Forced induction systems of all types can run without cooling the air charge, but doing so reduces the efficacy of the system.

Is Turbo or ProCharger better?

From an efficiency standpoint, the turbocharger has an advantage. It takes wasted exhaust and turns it into something useful. Meanwhile, a supercharger won’t do this and acts more like a naturally aspirated engine. However, with a turbocharger comes lag.

Is a 383 A small block?

While the standard 383 is the most common form of stroker small-block, there are several variations to this theme. The first question might be: Why not just build a 400ci small-block and take advantage of the additional cubic inches?

How much horsepower does a Weiand supercharger add?

Using the supplied 3-inch blower pulley and 6-inch crank pulley, the Weiand 177 supercharger produced a peak of 6.3 psi and increased the power output of the 350 to 405 hp and 446 lb-ft of torque.

How hard is it to install a ProCharger?

Answer: Most ProCharger systems can be installed in 8-10 hours with simple hand tools. All ProCharger street supercharger systems are engineered to the highest quality standards, with no need for cutting of body panels or alterations to stock hardware.

What’s the difference between supercharger and Procharger?

Unlike a basic supercharger, the procharger gives the engine a steady stream of air. A procharger is a type of centrifugal supercharger that uses a rotating impeller to draw air into itself. They also don’t take more than the legal limit of power, which superchargers tend to do.

Are superchargers intercooled?

A supercharger gets air from outside car and using engine power thru a belt drive, forces air into intake of engine. Both methods do not need intercoolers.