What is CC-Link communication?

CC-Link is an abbreviation of Control & Communication Link. Its purpose is to integrate system control and communication. CC-Link is an open network. It is possible to configure your system according to its purpose by assembling the products of many participating vendors (partner manufacturers).

What is CC-Link IE Field?

CC-Link IE Field is an ultra high speed & ultra large capacity network, which provides both synchronous deterministic (cyclic) communication and asynchronous on-demand messaging (transient) communication. I/O control, motion control and safety functions can be combined seamlessly.

What is Slmp protocol?

The SLMP Protocol uses standard Ethernet hardware and software to exchange I/O data, alarms, and diagnostics. It is Mitsubishi Electric’s publicly available, standardized communication format for communicating with Q, iQ and L Series PLCs through Ethernet or serial connections.

What is PN IO?

PROFINET IO (PN-IO) The PROFINET/IO (PN-IO) protocol is a field bus protocol related to decentralized periphery. The actual cyclic data transfer and acyclic notification uses the “lightweight” PROFINET/RT protocol. There are some other related PROFINET protocols (e.g. PROFINET/DCP, which is handling addressing topics).

What is ControlNet and DeviceNet?

Number of Devices – ControlNet allows up to 99 devices per node compared to DeviceNet. Speed – ControlNet has a much higher speed than DeviceNet at data transfer rates of 5MB/s. Deterministic Data Transfer – In addition to requiring higher volumes of data, ControlNet also uses deterministic data transfer.

What is the purpose of DeviceNet?

DeviceNet® is a digital, multi-drop network that connects and serves as a communication network between industrial controllers and I/O devices, providing users with a cost-effective network to distribute and manage simple devices throughout the architecture.

What is difference between Ethernet and EtherCAT?

Ethernet, as stated previously, is able to route data through many different nodes, in a master/slave configuration, sending and receiving based on requests. With EtherCAT, the master sends data, possibly only a single frame for the entire node network that will pass through each node.

What is the purpose of CC-Link?

Using CC-Link, a stand-by master station can assume control of network communications in the event that the primary master station becomes inoperable. In the event that a slave station stops communicating, CC-Link allows communication to continue with all other stations.

Which type of station used in CC-Link description?

Type of station used in CC-Link Description Manages and controls the data link system. Possesses the network control information (network parameters). One station is required per system. Communicates with the master station and other local stations.

What is 2cc-link ie?

2.CC-Link IE is a vertically integrated and Ethernet-based network from IT layer to field layer. 3.Ultra high-speed & ultra large capacity network with real-time performance. Provides high-capacity information management and real-time control communication. Provides safe, high-speed control when simultaneously sending quality and traceability data.

How fast is CC-Link?

With the high communication speed of 10 Mbps, CC-Link can achieve the maximum transmission distance of 100 meters and connect to 64 stations. In addition to high-speed 10 Mbps operation, CC-Link is extremely deterministic.