How do you unlock the Control Lock on a washing machine?
Washer – Front Load Washer Control Lock
- Press and hold the LOCK button for 3 seconds.
- A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on.
How do I turn off the Control Lock on my Whirlpool washer?
To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
How do you bypass the Control Lock on a Whirlpool Duet dryer?
Press and hold the “Control Lock” button for at least three seconds to unlock the control panel. Once unlocked, you have full access to the dryer controls.
What is the Control Lock button on Whirlpool washer?
There is no Error – Control Lock is activated Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation.
How do you unlock a Whirlpool front load washer?
Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
How do you manually unlock a Whirlpool Duet washer?
You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off. then with the washer unplugged reach down and pull a small ring on the top of the door lock to manually open the door lock.
How do I unlock my Whirlpool front load washer?
How do I unlock the controls on my Whirlpool duet HT washer?
To unlock the control panel on a Whirlpool Duet washer, hold the End of Cycle Signal button for about three seconds. Once the Control Lock indicator light turns off, the control panel is unlocked.
How do you unlock the door of a whirlpool duet washer?
Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.
How can I unlock door to Whirlpool duet washer?
How to Unlock a Whirlpool Duet Washing Machine Turn off the washer and unplug the appliance. Locate the retaining tabs and/or screws that hold the top horizontal panel down. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance. Put the lid back down and plug the washing machine back into the electrical outlet.
How do I Reset my Whirlpool duet washing machine?
Start with the easy stuff… Unplug the washer for 30 seconds to attempt to reset the Duet washer control. Check your home water valves if your fill hoses have a flood stop check valve turn the water off, disconnect the hoses and run a little water into a bucket. Then reconnect the hoses to your washer and do a Duet Washer Quick Diagnostic Test.