How do I remove a minor car dent?

4 Simple Ways To Remove Smaller Dents From Your Car

  1. Remove a dent with a hair dryer. Locate and measure the dent.
  2. Use a plunger. A plunger is a magic tool.
  3. Fix a dented bumper with boiling water.
  4. Use a vacuum cleaner and a bucket.

Do dent pullers really work?

Dent pullers only work on shallow dents on flat, flexible surfaces. They can improve the appearance of dents but probably won’t create a perfect finish. But these tools will not work on deep, angular dents or damage along the edges of bodywork.

How much does it cost to get a small dent out of a car?

Small dents that are one inch or less typically cost between $50 and $120 to repair. For every additional half-inch, the price of the repair usually goes up $10 to $30. For example, if you have a 12-inch dent that you need to repair, you can expect the total cost to be anywhere from $160 to $450.

Do suction cups work on dents?

If you don’t have access to the back of the dent, you can remove dents with a small suction cup. The suction cup literally “sucks” the dent out of the metal and removes it from your car without drilling any holes.

Does boiling water remove dents in metal?

Not quite! Here’s a few reason why this is risky to try: You have a high risk of burning your fingers before you are able to successfully pop the dent back into place. Using boiling water on the car part is just as likely to cause further damage, which will only increase the cost of repair.

Does a plunger work to remove dents?

Run inside and grab your plunger. This method works well for small to medium-sized dents and dings in your car. A cup plunger works much better than the flange plungers commonly used for toilets. Stick the plunger to over your dent and start plunging until the dent pops back into place.

Does hot water really fix dents?

After boiling some hot water in a pot, he pours it over the dented areas. The heat makes the metal more expandable and malleable, allowing it to be pushed and pulled easily. Since the shape the parts conform to is the car’s original design, it becomes much more likely they will pop back into position.

Can you hammer out a car dent?

Using a Standard Hammer Most metal hammers will do nothing more than dent, scratch and compromise the body of your vehicle. It’s very easy to make things worse with a standard hammer. Instead, professional bodywork hammers come in a range of head shapes and sizes to handle a variety of dents.

Do dent pullers work?

What happens if you pour boiling water on your car?

Damaged paintwork – Pour scalding hot water on the windscreen, and you run the risk of damaging the paintwork as the water runs off. Boiling hot water can melt the protective wax layer on the paint and leave a white watermark stain, which can be tough to remove.