How do I install Star TSP650?

Set up Star Printer TSP650 for Windows

  1. Step 1: Download Star Utility.
  2. Step 2: Install the Star driver.
  3. Step 3: Connect to PC.
  4. Step 4: Set the Printer to Default Printer.

How do I setup a star sp700 printer?

Printer Hardware Setup

  1. Connect the power cable to the printer and plug the other end into a power outlet.
  2. Connect an ethernet cable to the printer port labeled ‘100/10 BASE’.
  3. Plug the other end of the ethernet cable into an open numbered port on the router.
  4. Open the printer’s front lid to reveal the ink ribbon tray.

How do I install Star tsp100 in Windows 10?

How to Install a Star TSP 100 On Windows

  1. Download / Prepare Star TSP Printer drivers. Download the latest drivers from here. Unzip the downloaded folder.
  2. Install Star TSP Printer drivers. Once you see the first screen of the InstallShield Wizard come up, click Next to begin installation.
  3. Configure printer settings.

How do I add a Star printer in Windows 10?

How to Install Star Printer Driver on Windows 10

  1. Plug in the Star printer (Power and USB)
  2. Turn the Star printer on and ignore/cancel any popup messages on the computer screen.
  3. Download the Star printer driver here. -Click the link to download and then extract the folder to the desktop.

How do I connect my star sp700 to my iPad?

Connect Bluetooth Scanners to iPads Visit your iPad’s Settings. Make sure Bluetooth is toggled on. Tap Socket S700 from the Devices menu to pair it.

How do I find my star sp700 IP address?

Finding the printer’s IP address

  1. Turn off the Star printer.
  2. Press and hold the feed button.
  3. Turn the printer back on.
  4. Continue to hold the feed button until the Network Configuration report prints out.
  5. Confirm the printer IP address. An example IP address would be:

How do I connect my Star printer to my tablet?

How to connect the Star printer to iOS and Android tablets

  1. Plug the printer in a 220V socket and turn it on with the power button.
  2. Insert the till roll in the printer and pull out its loose end.
  3. Connect the printer:
  4. Connect the tablet to the same Wi-Fi network the printer is connected to.

How do I connect my star TSP100III printer to my iPad?


  1. Check the printer’s power is on, and open TSP100III Utility.
  2. Tap [Unselected State] from “Selected Device”.
  3. From the Select Device list , select the device you want to connect and then tap [Apply].
  4. Tap [Change Network Settings]. This connects to the selected printer and opens the Web Configuration.

How to install star tsp100 cutter (tsp143)?

Open Devices and Printer, then right-click on the “TSP100 Cutter (TSP143)” and select Printer Properties. Click Print Test Page in the lower right-hand corner. The printer will print out a Windows Test Page, confirming successful installation. Click OK button to close the Star TSP100 Cutter properties windows.

How do I download and install the star printer driver?

Download the Star printer driver here. Double-click the Autorun.exe file inside the folder and the following window should appear: Click Installation, accept the installation agreement. The installer will begin and display the following: Click Next, and select Typical when prompted to choose a setup type.

How do I install futureprnt on my tsp100 printer?

Connect the TSP100 printer into the computer using the USB cable. The futurePRNT should have already been installed at this time. Once connected, a window will appear saying, “Installing device…”. The printer will try to install by itself.

How do I connect my Star Micronics printer to my computer?

Click on Add a device. Select Star Micronics from the list. Wait for the printer to be successfully added to your computer. In Devices and Printers, right click on Star Micronics and select properties. Open the services tab and take note of the COM number then click OK to close