How do I fix F9 error on Maytag oven?

How to Remove the F9 Code From Maytag

  1. Hold on the “Start/Stop” button for 10 seconds. This will end the beeping.
  2. Open the oven door and check the door latch.
  3. Spray a little WD-40 onto a washcloth and scrub off any rust or debris on the latch.
  4. Press the oven door shut gently.
  5. Test the oven.

What does F9 mean on a Maytag stove?

The F9 error code indicates a problem with the oven door lock assembly. The door lock assembly will need to be checked and replaced if defective. If the door lock assembly is okay, then the electronic oven control board will need to be replaced.

How do I fix error code F9?

Reset the Oven Sometimes, the F9 error code is the result of an electrical fault that has magnetized the circuitry. Resetting the oven by disconnecting the power for five minutes will demagnetize the circuitry and resolve the F9 error.

How do you unlock a Maytag stove?

Maytag Oven Door is Locked – What Should I Do?

  1. Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door.
  2. Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.

How do you fix error F9 on LG electric oven?

If the Control Panel Display lights up error code “F-9” it means oven failed at exceeding 150ºF after 5 minutes of preheating. 3. Have customer press the Clear/Off button to terminate the beeping alarm. 4.

How do you clear the code on a whirlpool F9?

Reset the appliance

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Monitor the range or oven for one (1) minute to ensure the error code does not display again.
  3. Verify the range or oven operation.

How do I clear E1 F9 code?

Filter clogged It picks up trash and small objects before they reach the pump, instigating error code E1 F9. To access the filter, unscrew and remove the front panel. Then gently turn it and remove it from the groove.

What does 5ab mean on a Maytag stove?

What does the SAB error code mean on my Maytag Range? “SAB” is an indication that your range has been placed in “Sabbath Mode”. This is set to disable the range for up to 72 hours for those religions that honor the sabbath. It cannot be defeated by unplugging the range or turning off the breaker.

By FAQ